Preparation of Iron Filler-Based Photocomposites and Application in 3D Printing

The introduction of metallic fillers to polymers via the photopolymerization approach can endow the composite materials with some unique properties, but the relevant research is still scarce due to the issue of light penetration and inner filter effect. Herein, for the first time the fabrication of photocomposites based on fine iron powder (i.e., a typical kind of metallic filler) is reported in this work. The free radical polymerization of two different acrylate monomers, poly(ethylene glycol) diacrylate and trimethylolpropane triacrylate, is performed in the presence of iron filler under mild conditions (i.e., light emitting diode (LED)@405 nm irradiation at room temperature under air). And the real-time Fourier transform infrared spectroscopy reveals remarkable photopolymerization kinetics of acrylates with high final conversions and fast polymerization rates despite the increasing contents of iron filler in the composites. Interestingly, the 3D printing technique is applied to the iron filler-based composites to produce tridimensional patterns with excellent spatial resolution. This work not only paves the way for the investigation of photocomposites based on metallic fillers through photochemical methods, but also broadens the potential application prospects.     

On the role of conserved proline residues in the structure and function of Clostridium pasteurianum 2[4Fe-4S] ferredoxin

The widespread occurrence of Pro residues adjacent to Cys ligandsin the sequences of [4Fe-4S] electron transfer proteins hasnot yet found a functional basis. The two such Pro of Clostridiumpasteurianum 2[4Fe-4S] ferredoxin have been probed by site-directedmutagenesis. Any one of them, but not both simultaneously, canbe substituted without impairing the proper folding of the protein.The reduction potentials of the ferredoxin variants fall ina narrow range of <20 mV above the potential of the nativeprotein. The biological activities with C.pasteurianum hydrogenaseand pyruvate-ferredoxin oxidoreductase do not change significantly,except when Lys replaces Pro. In these cases, the data suggestthat the two clusters of 2[4Fe-4S] ferredoxin may not alwaysbe equivalent in the interaction with the redox partners. Destabilizationof the structure has been observed as the consequence of theProl9 or Pro48 substitutions. Using 2-D NMR, this effect hasbeen associated with perturbations of both the hydrogen bondnetwork and one amino acid side chain around the [4Fe-4S] clusters.Thus, the conserved Pro found in the binding motif of [4Fe-4S]clusters in proteins strongly stabilizes the active site butdoes not play an essential role in the mechanism of electrontransfer.     

Infiltration and Top Seed Growth-Textured YBCO Bulks With Multiple Holes

The recently reported hole-patterned YBa₂Cu₃O _y (Y123) bulks with improved superconducting properties are highly interesting from material quality and application variety points of view. It is well known that the core of plain bulk superconductors needs to be fully oxygenated and some defects like cracks, pores, and voids must be suppressed in order that the material can trap a high magnetic field or carry a high current density. To minimize the above defects, we have used a combination of standard superconducting ceramic processing and an infiltration technique to prepare regularly perforated YBa₂Cu₃O _y (Y123) bulk superconductors. This process leads to negligible shrinkage upon annealing and a uniform distribution of Y211 inclusions. Texture was evidenced by neutron pole figure measurements. Flux mapping was used to verify the superconducting homogeneity of the samples and to investigate the field-trapping ability. In addition, the textured drilled samples were reinforced using resin or metal impregnation and the influence of the different processing steps on the hardness of the materials has been investigated.     

Numerical Simulations of the Effect of Conical Dimension on the Hydrodynamic Behaviour in Spouted Beds

The flow behaviours of gas‐solids were predicted by means of a hydrodynamic model of dense gas‐solid flow in spouted beds. Constitutive equations describing the particulate solids pressure and viscosity were implemented into a hydrodynamic simulation computer program. The effect of operating conditions (inclined angle and gas spouting velocity) on particle velocity and concentration in the spout, annulus and fountain regions were numerical studied. Both vertical and horizontal particle velocities increased with increasing spouting gas velocity. The diameter of the spout increases with decreasing the inclination angle. As the inclination angle is set greater than 60°, the spout cross‐section starts becoming bottlenecked, limiting the upwards flow of solids.     

Paf-acether in human skin

Paf is a phospholipid mediator present in human skin which induces inflammatory events such as neutrophil infiltration and increased vascular permeability. Recent data suggest that cutaneous cells, such as fibroblasts and keratinocytes, produce paf and that paf is released during allergic cutaneous reactions. It is tempting to speculate that paf may contribute to the development of various skin disorders with acute and chronic skin inflammation. Paf antagonists may help in bringing answers to this hypothesis and may offer new prospects for the treatment of cutaneous inflammatory diseases. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Modelling of the Nonlinear Behavior of Compatibilized Polyethylene/Polyamide Blends in Shear and Extensional Flows

We have studied the effect of the amount Φ_c of a reactive compatibilizer on the rheological properties of a polyethylene/polyamide blend, under steady shear and transient extensional flows. Here, we propose to describe the viscosity η(γ) and the first normal stress coefficient γ₁(γ) using a Carreau‐type power‐law model, which is a three‐parameter model. A single model is sufficient to express the behavior of γ₁(γ) On the other hand, the complete η(γ) curve is described by the superposition of two Carreau models, in relation to the presence of two relaxation mechanisms. Moreover, the extentional viscosity η_E(?), estimated using the end pressure drop observed in capillary flow experiments, is expressed by a two‐parameter power‐law model.     

Mechanical properties of epoxy networks based on DGEBA and aliphatic amines

The mechanical properties of epoxy networks based on diglycidyl ether of bisphenol A epoxy resin cured with various linear aliphatic amines, such as ethylenediamine, diethylenetriamine, triethylenetetramine, tetraethylenepentamine, and cyclic amines such as 1‐(2‐aminoethyl)piperazine and isophorone diamine, were studied. General characteristics such as T_g, density, and packing density, were determined and related to the structure and funcionality of the curing agent. Dynamic mechanical spectra were used to study both the α and β relaxations. Tensile and the flexural tests were used to determine the Young's and flexural modulus, and fracture strength all in the glassy state. Furthermore, linear elastic fracture mechanics was used to determine K_IC. As a rule, isophorone diamine network presented the higher tensile and flexure modulus while 1‐(2‐aminoethyl)piperazine gave the highest toughness properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Characterization of bimetallic NaY-supported Pt-Pd catalyst by EXAFS,TEM and TPR

NaY-supported bimetallic Pt-Pd catalysts have been studied by TEM, TPR and EXAFS. Small, randomly mixed particles are formed in the zeolite cages. When the Pt content is increased, a Pt core structure appears and the dispersion increases. Particle diameters are about 1–2 nm for bimetallic samples.     

Ice sheet survey over Antarctica using satellite altimetry: ERS-2, Envisat,SARAL/AltiKa,the key importance of continuous observations along the same repeat orbit

From September 2002 to October 2010, the Envisat radar altimeter surveyed Greenland and Antarctica ice sheets on a 35 day repeat orbit, providing a unique data set for ice sheet mass balance studies. Up to 85 repeat cycles are available and the whole Envisat data set may be along-track processed in order to provide height variability and trend with a good spatial resolution for the objectives of ice sheet survey.

Soon, a joint Centre National d’Etudes Spatiales/Indian Space Research Organisation mission, SARAL (Satellite with Argos and AltiKa), with the AltiKa payload on board, will be launched on exactly the same orbit (less than 1 km of the nomimal orbit in the across-track direction). This will allow an extension of previous European Remote Sensing (ERS) satellite, ERS-1 and ERS-2, and Envisat missions of the European Space Agency (ESA), in particular from the point of view of ice altimetry. However, AltiKa operates in the Ka band (36.8 GHz), a higher frequency than the classical Ku band (13.6 GHz), leading to important modifications and potential improvements in the interactions between radar wave and snow-pack.

In this paper, a synthesis is presented of all available information relevant to ice altimetry scientific purposes as derived from the Envisat mission: mean and temporal derivatives of the height ? but also of the backscatter and of the two waveform parameters ? snow-pack change corrections, across-track surface slope at 1 km scale, etc. The spatial and temporal variability of ice sheet surface elevation is investigated with the help of the high-resolution Envisat along-track observations. We show that at least 50 repeat cycles are needed to reach the required accuracy for the elevation trend. It is thus advocated as potentially highly beneficial for SARAL/AltiKa as a follow-on mission. Moreover, the novel characteristics of SARAL/AltiKa are promising in improving our understanding of snow penetration impact.     

Formal verification of collaboration patterns in healthcare

We propose a computer-based framework for the formal verification of collaboration patterns in healthcare teams. In this, the patterns are constructed diagrammatically as compositions of keystones that are viewed as abstract processes. The approach provides mechanisms for ensuring that safety properties are enforced and exceptional events are handled systematically. Additionally, a fully verified, executable model is obtained as an end product, enabling a simulation of its associated collaboration scenarios.